China OEM Htd Timing Pulleys pulley band

Product Description

CHINAMFG Machinery offers a wide range of high quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Standard and non-standard pulleys according to drawings are available.

 

Types of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other material on demand, such as cooper, bronze and plastic
 
Types of surface treatment:
 1.  Anodized surface -Aluminum Pulleys
 2.  Hard anodized surface — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated surface — Steel Pulleys
 5. Chromate surface — Steel Pulleys; Cast Iron Pulleys
 6. Nickel plated surface –Steel Pulleys; Cast Iron Pulleys
 
Types of teeth profile

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08″(2.032MM)
XL 1/5″(5.08MM)
L 3/8″(9.525MM)
H 1/2″(12.7MM)
XH 7/8″(22.225MM)
XXH 1 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and sizes

Imperial Inch Timing Belt Pulley,
1.     Pilot Bore MXL571 for 6.35mm timing belt; teeth number from 16 to 72;
2.  Pilot Bore XL037 for 9.53mm timing belt; teeth number from 10 to 72;
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt; teeth number from 10 to 120;
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt; teeth number from 10 to 120;
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt; teeth number from 10 to 120;
6.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt; teeth number from 14 to 50;
7.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt; teeth number from 14 to 156;
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt; teeth number from 14 to 156;
9.  Pilot Bore, Taper Bore H200 for 50.8mm timing belt; teeth number from 14 to 156;
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt; teeth number from 14 to 156;
11.  Taper Bore XH200 for 50.8mm timing belt; teeth number from 18 to 120;
12.  Taper Bore XH300 for 76.2mm timing belt; teeth number from 18 to 120;
13.  Taper Bore XH400 for 101.6mm timing belt; teeth number from 18 to 120;

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt; teeth number from 12 to 60; 
2.   Pilot Bore T5-21 for 10mm timing belt; teeth number from 10 to 60; 
3.   Pilot Bore T5-27 for 16mm timing belt; teeth number from 10 to 60; 
4.   Pilot Bore T5-36 for 25mm timing belt; teeth number from 10 to 60; 
5.   Pilot Bore T10-31 for 16mm timing belt; teeth number from 12 to 60; 
6.   Pilot Bore T10-40 for 25mm timing belt; teeth number from 12 to 60; 
7.   Pilot Bore T10-47 for 32mm timing belt; teeth number from 18 to 60; 
8.   Pilot Bore T10-66 for 50mm timing belt; teeth number from 18 to 60;
9.  Pilot Bore AT5-21 for 10mm timing belt; teeth number from 12 to 60;
10. Pilot Bore AT5-27 for 16mm timing belt; teeth number from 12 to 60;
11. Pilot Bore AT5-36 for 25mm timing belt; teeth number from 12 to 60; 
12. Pilot Bore AT10-31 for 16mm timing belt; teeth number from 15 to 60; 
13. Pilot Bore AT10-40 for 25mm timing belt; teeth number from 15 to 60; 
14. Pilot Bore AT10-47 for 32mm timing belt; teeth number from 18 to 60; 
15. Pilot Bore AT10-66 for 50mm timing belt; teeth number from 18 to 60;
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.  HTD5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.  HTD8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.  HTD14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore HTD5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
         14M-115; 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-12; PCGT8M-21; PCGT8M-36; PCGT8M-62; 
2.      PCGT14M-20; PCGT14M-37; PCGT14M-68; PCGT14M-90; PCGT14M-125;

Power Grip CHINAMFG Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-15, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.   RPP5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.   RPP8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.   RPP14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore RPP5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
     14M-115; 14M-170

Shipping Cost:

Estimated freight per unit.



To be negotiated
Pulley Sizes: Timing
Manufacturing Process: Saw
Material: Alloy
Customization:
Available

|

Customized Request

htd pulley

Are there specific guidelines for selecting the right HTD pulley for an application?

Yes, there are specific guidelines that can help in selecting the right HTD pulley for an application. The selection process involves considering various factors such as the application requirements, operating conditions, and pulley specifications. Here’s a detailed explanation of the guidelines for selecting the right HTD pulley:

1. Determine the Application Requirements:

Firstly, it’s important to understand the specific requirements of the application. This includes considering parameters such as the desired speed, torque, power transmission capacity, and the type of motion (linear or rotary). Additionally, determine if the application requires any specific features such as anti-backlash, vibration dampening, or precise positioning. Understanding the application requirements is crucial for selecting a pulley that can meet the performance criteria.

2. Calculate the Belt Length and Pitch:

The next step is to calculate the required belt length and pitch. This depends on the distance between pulley centers and the desired center-to-center distance. The belt length and pitch must be compatible with the selected HTD pulley to ensure proper engagement and power transmission. Manufacturers provide guidelines or equations to calculate the belt length based on the application parameters.

3. Consider Pulley Specifications:

When selecting an HTD pulley, consider the pulley specifications such as the number of teeth, pitch diameter, and bore size. The number of teeth determines the transmission ratio and affects the speed and torque output. The pitch diameter affects the belt’s wrap angle and the pulley’s contact area with the belt. The bore size should match the shaft diameter or allow for proper mounting methods (keyway, set screw, etc.). Additionally, consider the material of the pulley, which may vary based on factors like corrosion resistance or weight requirements.

4. Assess Load and Torque Requirements:

Evaluate the load and torque requirements of the application. This includes considering the maximum load or force that the pulley system needs to transmit. The torque requirements depend on the power output and the speed of the application. Ensure that the selected HTD pulley is capable of handling the anticipated loads and torques without exceeding its rated capacity. Refer to manufacturer specifications and load capacity charts to make an informed selection.

5. Account for Operating Conditions:

Take into account the operating conditions in which the HTD pulley will be used. Factors such as temperature, humidity, exposure to chemicals or solvents, and presence of contaminants can affect the performance and durability of the pulley. Ensure that the selected pulley is made from a suitable material that can withstand the specific operating conditions encountered in the application.

6. Consult Manufacturer or Supplier:

If in doubt or if the application has unique requirements, it is advisable to consult the manufacturer or supplier. They can provide expert guidance and recommend the most suitable HTD pulley based on the specific application details. Manufacturers often have technical support teams that can assist with the selection process and provide customized solutions if necessary.

7. Consider Cost and Availability:

Lastly, consider the cost and availability of the selected HTD pulley. Evaluate the pricing based on the pulley’s quality, performance, and material specifications. Additionally, ensure that the chosen pulley is readily available from reliable suppliers to prevent delays in the application’s development or maintenance.

In summary, the selection of the right HTD pulley involves determining the application requirements, calculating the belt length and pitch, considering pulley specifications, assessing load and torque requirements, accounting for operating conditions, consulting manufacturers or suppliers, and considering cost and availability. By following these guidelines and considering the specific application needs, an appropriate HTD pulley can be selected to ensure optimal performance, reliability, and longevity in the application.

htd pulley

What maintenance procedures are necessary to ensure the reliability of HTD pulleys?

To ensure the reliability and optimal performance of HTD pulleys, several maintenance procedures should be followed. These procedures help identify and address potential issues, prevent premature wear or failure, and extend the lifespan of the pulleys. Here’s a detailed explanation of the necessary maintenance procedures for HTD pulleys:

1. Regular Inspection:

Regular inspections are essential to identify any signs of wear, damage, or misalignment in HTD pulleys. Inspect the pulleys visually, looking for cracks, chips, or deformations. Check the teeth for excessive wear or damage. Ensure that the pulleys are properly aligned and that there are no signs of excessive vibration or noise during operation. Regular inspections allow for early detection of potential problems, enabling timely maintenance or replacement of the pulleys to prevent further damage or failures.

2. Belt Tension Checks:

Proper belt tension is crucial for the reliable operation of HTD pulleys. Insufficient tension can cause belt slippage, while excessive tension can lead to premature wear on the pulleys and belts. Regularly check the belt tension using appropriate tensioning tools or methods recommended by the pulley manufacturer. Adjust the tension as needed to ensure it falls within the specified range. Maintaining the correct belt tension helps optimize power transmission, reduce wear, and prevent belt failure.

3. Lubrication:

Lubrication is important for reducing friction and wear in HTD pulleys. Some pulleys may require periodic lubrication of the bearings or bushings to ensure smooth operation. Consult the manufacturer’s guidelines to determine the appropriate lubrication intervals and the type of lubricant to use. Apply the lubricant as recommended, taking care not to over-lubricate. Proper lubrication helps minimize friction and heat generation, extending the lifespan of the pulleys and ensuring reliable performance.

4. Alignment:

Proper alignment of HTD pulleys is crucial for their reliability. Misalignment can cause premature wear on the belts, pulleys, and bearings, leading to reduced performance and potential failures. Regularly check the alignment of the pulleys using alignment tools or methods recommended by the manufacturer. Adjust the pulley positions as necessary to ensure proper alignment. Proper alignment ensures efficient power transmission, reduces wear, and minimizes the risk of belt slippage or premature failure.

5. Cleaning:

Keeping HTD pulleys clean is important for their reliable operation. Regularly clean the pulleys to remove dust, debris, or other contaminants that can accumulate on the pulley surfaces or teeth. Use a soft brush or cloth to gently clean the pulleys, taking care not to damage the teeth or other delicate parts. Avoid using harsh chemicals that can degrade the pulley material. Clean pulleys contribute to improved belt traction, reduced wear, and enhanced overall reliability.

6. Replacement of Worn or Damaged Components:

If any HTD pulley components, such as the pulleys themselves or the belts, are worn, damaged, or nearing the end of their lifespan, they should be replaced promptly. Worn or damaged pulleys can compromise the performance and reliability of the entire system. Follow the manufacturer’s recommendations for replacement parts and ensure that the new components meet the required specifications. Timely replacement of worn or damaged components helps maintain the reliability and longevity of HTD pulleys.

7. Follow Manufacturer’s Guidelines:

Lastly, it is important to follow the specific maintenance guidelines provided by the HTD pulley manufacturer. Different pulley designs and materials may require specific maintenance procedures or intervals. Consult the manufacturer’s documentation for detailed instructions on maintenance, lubrication, inspection, and any other relevant procedures. Adhering to the manufacturer’s guidelines ensures that the pulleys are maintained correctly and maximizes their reliability and performance.

In summary, to ensure the reliability of HTD pulleys, regular inspections, belt tension checks, lubrication, alignment, cleaning, replacement of worn components, and adherence to the manufacturer’s guidelines are necessary. By following these maintenance procedures, the lifespan of HTD pulleys can be extended, and their reliable operation can be ensured, minimizing downtime and optimizing the performance of the systems in which they are used.

htd pulley

What is an HTD pulley, and how does it differ from other pulley types?

An HTD pulley, which stands for “High Torque Drive” pulley, is a specific type of pulley used in power transmission systems. It is designed to work in conjunction with HTD belts, also known as timing belts, which have trapezoidal-shaped teeth. Here’s a detailed explanation of HTD pulleys and their differences from other pulley types:

1. Tooth Profile:

The primary difference between HTD pulleys and other pulley types lies in the tooth profile. HTD pulleys feature a trapezoidal tooth profile, specifically designed to match the shape of HTD belts. This tooth profile provides a larger contact area between the pulley and the belt, resulting in improved power transmission capabilities and higher torque capacity compared to other pulley types.

2. Synchronous Power Transmission:

HTD pulleys are commonly used in synchronous power transmission systems. This means that the pulley and the belt mesh together with precise tooth engagement, ensuring the synchronous and accurate transfer of power. The trapezoidal tooth profile of the HTD pulley and belt combination allows for efficient power transmission without slippage, making it suitable for applications that require precise timing and synchronization.

3. Load Distribution:

The design of HTD pulleys allows for even load distribution across the belt’s teeth. The trapezoidal tooth shape helps distribute the load more evenly compared to other pulley types, reducing stress concentration on individual teeth. This load distribution characteristic enhances the overall performance and longevity of the power transmission system, minimizing the risk of premature belt wear or tooth failure.

4. Backlash Reduction:

HTD pulleys are designed to minimize backlash, which refers to the slight movement or play that can occur between the pulley and the belt. The trapezoidal tooth profile of HTD pulleys provides a positive engagement with the belt, reducing or eliminating backlash. This feature is particularly important in applications where precise positioning or motion control is required, as it ensures accurate and repeatable positioning of the driven components.

5. Wide Range of Sizes and Options:

HTD pulleys are available in a wide range of sizes, configurations, and materials to accommodate different power transmission requirements. They come in various diameters, number of teeth, and bore sizes, allowing for flexibility in system design. HTD pulleys can be made from materials such as aluminum, steel, or plastic, depending on the specific application and environmental factors.

6. Belt Compatibility:

HTD pulleys are designed to work specifically with HTD belts. These belts have corresponding trapezoidal teeth that mesh seamlessly with the tooth profile of HTD pulleys. It is important to ensure that the pulley and belt are compatible in terms of tooth pitch and profile to achieve optimal performance and avoid premature wear or belt damage.

7. Application Range:

HTD pulleys are commonly used in various applications that require efficient power transmission, precise timing, and moderate to high torque capacity. They find application in industries such as robotics, automation, packaging machinery, CNC machines, 3D printers, and many more. HTD pulleys are suitable for both industrial and consumer-level applications where synchronous power transmission is essential.

In summary, HTD pulleys are a specific type of pulley designed for use with HTD belts in synchronous power transmission systems. They differ from other pulley types due to their trapezoidal tooth profile, which provides improved torque capacity, load distribution, reduced backlash, and precise timing. HTD pulleys are available in various sizes and materials, offering flexibility in system design and finding applications in a wide range of industries.

China OEM Htd Timing Pulleys   pulley band	China OEM Htd Timing Pulleys   pulley band
editor by CX

2023-10-07